Step 9: Burner Test And Adjustment; Test Rangetop Burners - Thermador Professional PRO-HARMONY PRD30 Manuel D'installation

To Reinstall the Oven
Door:

Step 9: Burner Test and Adjustment

Test Rangetop Burners

1. Hold door on both sides. Insert hinges into hinge slots. The door will be about
halfway open.
It may be necessary to press firmly inward on the lower portion of the door,
using a rocking motion to fully seat the door's hinges.
2. Open door all the way to expose hinge clips. Push hinge clips away from you
(toward the oven) until they meet the hinge.
3. Close and open the door slowly to test the installation. It should open and close
smoothly and be straight, not crooked.
Install any loose components, such as burner caps and grates, that may have been
removed earlier. Be certain that burner caps seat properly into the burner bases.
Before testing operation of the appliance, verify that the unit and the gas supply
have been carefully checked for leaks and that the unit has been connected to the
electrical power supply. Turn the manual gas shut-off valve to the open position.
Test Burner Ignition. Select a rangetop burner knob. Push in and turn counter-
clockwise to HI. The ignitor/spark module will produce a clicking sound. Once the air
has been purged from the supply lines, the burner should light within four (4) sec-
onds.
Photo C: Flip hinge clip toward you
Photo D: Hinge removed from oven
Page 25