Maintenance And Care Of The System - ATT Nussbaum POWER LIFT HF 3S 5000 Manuel D'exploitation

7

Maintenance and care of the system

Before a service, all preparations must
be made so that during maintenance
and repair work there is no danger to
the life and limbs or potential to dam-
age objects.
Value is placed on long lifetimes and safety in the
development and production of Nussbaum prod-
ucts. To guarantee the safety of the operator, prod-
uct reliability, low running costs, keep the warranty
and also the long-lifetime of the product, proper
set up and operation is just as important as regular
maintenance and sufficient care.
Our platforms fulfil or exceed all safety standards of
the countries we supply to. For example, Europe-
an regulations require a service by qualified experts
1 = Lubricate with
multi-purpose grease
2 = Oil
3 = Visual inspection
4 = Inspect
5 = Clean with
compressed air
6 = Clean
OPI-POWER LIFT HF 3S 5000-V3.0-DE-EN-FR-ES-IT
3D
4A
5B
3D
3D
4A
2A
every 12 months of work of the platform. To guar-
antee the largest possible availability and function-
al capacity of the lift system, ensure the list of any
cleaning, care and maintenance work is done.
The lift system is to be serviced at regular intervals
according to the following plan. For intensive oper-
ation and higher degree of contamination shorten
the service interval.
The complete function of the lift system is to be ob-
served during daily use. Customer service must be
informed of any malfunctions or leaks.
To simplify maintenance work, follow instructions on
the maintenance sticker that is found somewhere
on the unit, depending on the lift design.
4A
4A
3B
2B
3D
4A
5B
3A
6A
4A
2A
12
11 1
2
10
1 x / 12
9 3
4
8
5
7
6
A = Annually
12
11 1
2
10
2 x / 12
9 3
4
8
5
7
6
3A
B = Semi-annually
12
1
11
2
10
2 x / 12
9 3
3D
4
8
5
7
6
C = Monthly
12
1
11
2
10
2 x / 12
9 3
4
8
4A
5
7
6
D = Daily
85