1. Manuels
  2. Marques
  3. ATT Manuels
  4. Systèmes de levage
  5. Nussbaum POWER LIFT HF 3S 5000
  6. Manuel d'exploitation

System Master Sheet; Manufacturer; Purpose - ATT Nussbaum POWER LIFT HF 3S 5000 Manuel D'exploitation

Masquer les pouces
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2

System master sheet

2.1

Manufacturer

Nussbaum Custom Lifts GmbH
Hertz Str. 6
D-77694 Kehl-Sundheim
2.2

Purpose

The lift is a lifting tool for raising motor vehicles in normal workshop operation. A total weight of max. 5.000
kg for a maximum load distribution of 3:1 or 1:3 in the drive in direction or against the drive-in direction may
not be exceeded. Single loading of the carrier arm may not occur.
Set up of the standard lift in explosion endangered workshops and humid spaces (e.g. washing halls) is
prohibited. This is only possible with custom equipment.
Lift operation is done directly on the operating column.
After construction and maintenance changes on load carrying parts the lift must be inspected afterwards
by a specialist who approves the changes. If the set up location is changed, the lift must be checked
again by a specialist and changed approved.
Carrier arm variants
Standard arm
Standard arm and
extension 220 mm
Double swivel arm (DG)
Universal
OPI-POWER LIFT HF 3S 5000-V3.0-DE-EN-FR-ES-IT
POWER LIFT HF 3S 5000
778-1213 mm
max. 1433 mm
max. 1825 mm
860-1850 mm
69

Publicité

Table des Matières
loading

Manuels Connexes pour ATT Nussbaum POWER LIFT HF 3S 5000

Contenu connexe pour ATT Nussbaum POWER LIFT HF 3S 5000

Ce manuel est également adapté pour:

Nussbaum power lift hf 3s 5000 dgNussbaum power lift hf 3s 5000 universalNussbaum hymax hf 3s 5000Nussbaum hymax xx 3200 hfNussbaum hymax hf 3s 5000 universal

Table des Matières