Care And Maintenance - Trevi TT 1022 BT Mode D'emploi Et Branchement

ENGLISH
DANGEROUS VOLTAGE
This symbol shown on the back of the appliance and in
this manual indicates the presence inside this appliance
of components operating at high voltage, do not open
it to avoid the risk of electric shock.
NOTES ON USE
This is a precision electronic appliance; avoid using it in the following cases:
• Near magnetic fields or heat sources such as heaters and stoves.
• In very humid places such as bathrooms, swimming pools, etc... or in dusty places or places subject to strong
vibrations.
• Position the appliance so that there is always enough space on its sides for free circulation of air (at least 5cm).
• Do not obstruct the ventilation slots.
• If liquids penetrate inside the appliance, immediately disconnect the plug from the socket and take the appliance
to the nearest TREVI authorized service center.
• Always check that the power and connection cables are installed correctly.
• The power adapter must be connected to a socket close to the device and must be easily accessible.
• If you notice excessive heat on the device or on the power adapter, immediately disconnect the plug from the
main power outlet.
• Do not pull the power cord.
• No naked flame sources, such as lighted candles, should be placed on the device.
• The appliance must not be exposed to dripping or splashing water and no objects filled with liquid, such as vases,
must be placed on the appliance.
• Keep this manual for future reference.

CARE AND MAINTENANCE

Use a slightly damp soft cloth for cleaning. Do not use solvents and abrasive substances.
IMPORTANT
This device is designed for home use (not professional use). This appliance has been carefully built to ensure long-
lasting perfect performance. However, should any inconvenience occur, please contact your local authorised TREVI
Service Centre.
TREVI follows a policy of ongoing research and development. Therefore products may have different features from
those described.
CONTROLS
1. Bluetooth Led indicator
2. Headphone Input
3. Power switch/ Volume cotrol
4. Switch Function selector Phone - Bluetooth
5. Speakers
6. Tone arm
7. Speed selector - Three speed for choice: 33, 45, 78 rpm
8. Auto-Stop Selector
POWER
Insert the plug of the adaptor supplied into the DC power socket (15) and connect the DC adaptor to a 110-230V
~ 50/60Hz socket.
POWER ON/OFF/VOLUME CONTROL
1. Turn the knob (3) clockwise to switch On the unit; set the function selector (4) to the PHONO or BLUETOOTH
position;
2. Turn the knob (3) anticlockwise until you hear a "click" to switch Off the unit;
3. Turn the knob (3) to adjust the volume.
ATTENTION
This symbol on the back of the appliance and in this
manual indicate the presence on them of important
instructions for safe use. Read them carefully before
using the appliance.
9. Tone arm lift
10. Adapter - Use this when playing 45rpm records with
cut out centres
11. Dust cover
12. AUX-IN input
13. LINE OUT socket R channel
14. LINE OUR socket L channel
15. DC power jack
6
TT 1022 BT