Opale-Paramodels Backpack M3 Manuel D'utilisation page 22

The ESC cable (signal) has to be connected to your re-
ceiver. Please refer to your radio settings and its user's
manual in order to know which channel is dedicated
to the throttle.
Place the pilot (ready to fly) on the frame like shown
on the picture.
And hold the legs of the pilot by passing the elastic
through the side holes in the harness dedicated to
this purpose.
Then attach the elastic on the side part.
Place the propeller provided with the motorisation.
The Opale Paramodels logo on the propeller as to be
forward. By no means it can be visible from the rear
side.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
22