Danger In The Event Of Non-Observance Of The Safety Instructions; Safety Consciousness On The Job; Safety Instructions For The Operator; Safety Instructions For Installation And Maintenance Work - Wilo SiFire Easy Série Notice De Montage Et De Mise En Service

English
2.3 Danger in the event of non-observance of the
safety instructions
Non-observance of the safety instructions can
result in risk of injury to persons and damage to
the environment and the product/unit. Non-
observance of the safety instructions results in
the loss of any claims to damages.
In detail, non-observance can, for example, result
in the following risks:
• Danger to persons from electrical, mechanical and
bacteriological influences,
• Damage to the environment due to leakage of
hazardous materials.
• Property damage
• Failure of important product/unit functions
• Failure of required maintenance and repair proce-
dures

2.4 Safety consciousness on the job

The safety instructions included in this Installation
and operating instructions, the existing national
regulations for accident prevention together with
any internal working, operating and safety regula-
tions of the operator are to be complied with.

2.5 Safety instructions for the operator

This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
• If hot or cold components on the product/the unit
lead to hazards, local measures must be taken to
guard them against touching.
• Guards protecting against touching moving com-
ponents (such as the coupling) must not be
removed whilst the product is in operation.
• Leakages (e.g. from the shaft seals) of hazardous
fluids (which are explosive, toxic or hot) must be
led away so that no danger to persons or to the
environment arises. National statutory provisions
are to be complied with.
• Highly flammable materials are always to be kept
at a safe distance from the product.
• Danger from electrical current must be eliminated.
Local directives or general directives [e.g. IEC, VDE
etc.] and local power supply companies must be
adhered to.
• Danger from unintended start must be took in
account.
2.6 Safety instructions for installation and
maintenance work
The operator must ensure that all installation and
maintenance work is carried out by authorised and
qualified personnel, who are sufficiently informed
from their own detailed study of the operating
instructions.
Work on the product/unit must only be carried out
when at a standstill. It is mandatory that the pro-
42
cedure described in the installation and operating
instructions for shutting down the product/unit
be complied with.
Immediately on conclusion of the work, all safety
and protective devices must be put back in posi-
tion and/or recommissioned. Danger from unin-
tended start must be took in account.
2.7 Unauthorised modification and manufacture of
spare parts
Unauthorised modification and manufacture of
spare parts will impair the safety of the product/
personnel and will make void the manufacturer's
declarations regarding safety.
Modifications to the product are only permissible
after consultation with the manufacturer. Original
spare parts and accessories authorised by the
manufacturer ensure safety. The use of other
parts will absolve us of liability for consequential
events.

2.8 Improper use

The operating safety of the supplied product is
only guaranteed for conventional use in accord-
ance with Section 4 of the operating instructions.
The limit values must on no account fall under or
exceed those specified in the catalogue/data
sheet.

3 Transport and interim storage

The pressure boosting system for fire extinguish-
ing purposes is supplied on a pallet. It is protected
from moisture and dust by a plastic shrink-wrap.
The equipment must be transported by means of
authorised load devices. (See example on Fig. 1)
WARNING! Risk of personal injury!
The static stability of the unit must be taken into
account. Only qualified personnel is allowed to
handle the pruduct by using suitable and
authorised equipment.
Lifting straps must be fastened to the ring bolts
placed on the base frame.
The manifolds do not fit with the handling of the
system and must not be used to fix loads in transit.
CAUTION! Risk of product damage!
Handling by using discharge manifold can cause
leakages!
On arrival, inspect the pump immediately for any
transport damage. If transport damage is
detected, the necessary steps involving the carrier
must be taken within the specified period.
CAUTION! Risk of product damages!
If the product shall be installed later on, store it
in a dry place. Protect it from impacts and any
external influences (moisture, frost, etc. ...).
Handle the product with care.
WILO SE 01/2018