Cleaning And Maintenance Operations; Other Warnings - ELEKTRA A1 Mode D'emploi

CLEANING AND MAINTENANCE OPERATIONS

Warning:
Disconnect appliance from the power supply before performing any cleaning
operations.
A) Remove all movable parts of the machine and wash with plenty of water and neutral
soap (never wash them in the dishwasher)
B) Clean the machine body # 8 with a damp cloth (never dip it in water).
C) Make sure there is no ground coffee stuck inside the ground coffee hopper # 7. If
there is any, remove it with a paintbrush and a completely dry cloth, and by pulling
mill glass lever # 9.
D) Remove bell # 2, and clean the mills and their housing with a paintbrush and a com-
pletely dry cloth.
Cleaning operations should be carried out daily for best results.

OTHER WARNINGS

A) Every so often check the wear of mills, bearing in mind that in best conditions they
can grind approximately 600 kilos of coffee.
B) The wear of mills can be detected by checking them and also when grinding takes
longer or is noisier than usual.
* Store the package in a safe place.
* In case of removal or service the machine should be move exclusively in its original
packaging to avoid any accidents during transport.
51