Memory Slot Operation "Preset" And "Set - VOLTCRAFT HPS-11530 Notice D'emploi

Connect the plus pole (+) of the consumer with the red socket "+" and the minus pole (-) of the consumer with
the blue socket "-" of the respective output (front = "AUX. OUTPUT", rear = "MAIN OUTPUT").
Now you can switch on the connected consumer.
The current consumption of the connected consumer is displayed in Ampere (A) in the
display (3).

Memory Slot Operation "Preset" and "Set"

Three fixed voltages, including current settings, can be stored in the device with the "Set" function and
directly selected through the "Preset" function.
Ex works, all three memory slots (P1, P2, P3) are preset.
They are assigned as follows
Memory
Type
HPS-11530
HPS-11560
HPS-13015
HPS-13030
HPS-16015
Make sure that no consumers are connected.
Activate the "Preset" function through the "MODE" (13) slider on
the rear. Put the switch in the "Preset" position. The front LED dis-
play "REAR CONTROL" (6) lights up. The front rotary controls are
now inactive.
34
P1
Voltage Current
5 V Maximum
P2
Voltage Current Voltage
13.8 V Maximum
P3
Current
15 V
15 V
25 V Maximum
25 V
55 V