Honda Power Products WX15T Manuel De L'utilisateur page 30

3.Clean in the air cleaner element warm soapy water, rinse and allow
to dry to thoroughly, or clean in a non-flammable or high flash point
solvent and allow to dry.
4.Dip the air cleaner element in clean engine oil, and then squeeze out
all the excess oil. The engine will smoke when started if too much oil
is left in the foam.
Clean
5.Wipe dirt from the air cleaner body and cover, using a moist rag. Be
careful to prevent dirt from entering the carburetor.
6.Reinstall the air cleaner element.
7.Reinstall the air cleaner cover by inserting the lower tabs, and then
insert latch tabs.
Squeeze and Dry
Do not twist.
Dip in Oil
Squeeze
Do not twist.
27