Honda Power Products WX15T Manuel De L'utilisateur page 28

1.Changing oil
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1.Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap, drain plug and the sealing washer.
2.Allow the used oil to drain completely, and then reinstall the drain
plug, with a new sealing washer, and tighten it securely.
3.With the engine in a level position, fill with the recommended oil (see
page 11) to the upper limit.
ENGINE OIL CAPACITY: 0.25 L (0.26 US qt, 0.22 Imp qt)
4.Screw in the oil filler cap securely.
OIL FILLER CAP
SEALING WASHER
(Replace)
OIL DRAIN PLUG
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash, pour
it on the ground, or down a drain.
UPPER LIMIT
25