Installation; Operation; Cleaning, Care And Maintenance; Changing The Bulb - Eazyzap Y724 Mode D'emploi

Telephone Helpline: 0845 146 2887 (United Kingdom)

Installation

Note: Ensure the mounting substrate and the fixings used can support the weight of the
appliance. If in doubt seek professional advice or assistance.
Remove all packaging and protective film from the Fly Killer.
1.
For best results, locate the Fly Killer in the darkest part of the room, but at least 1 metre away from
2.
food preparation areas.
Note: Close proximity to other light sources such as sky lights and windows will reduce
the effectiveness of the Fly Killer.
Connect the appliance to mains power.
3.

Operation

WARNING: Under no circumstances should hands be placed anywhere near the high
voltage grid when the appliance is operational.
The fly killer works by luring insects on to an electrified metal grid using ultra-violet light. It uses no
chemicals and is pollution free. To use the Fly Killer:
Press the switch to the ON position.
1.
The light will come on and the grid will become electrically charged.
2.

Cleaning, Care and Maintenance

• Always switch off the power and disconnect the appliance from the power supply before cleaning.
• Clean the collection tray regularly with warm soapy water.
• DO NOT immerse the appliance in water. Wipe the safety guard and external casing with a damp cloth.
• Change the bulbs every 9 months.

Changing the Bulb

WARNING: Always turn Off the appliance and disconnect from the power supply before
changing the bulb.
Remove the catch tray.
1.
Lay the appliance face down.
2.
Unscrew the two screws holding the safety guard
3.
at the rear of the Fly Killer [Fig. 1].
Lift up the guard rail [Fig. 2].
4.
Holding the ends of the bulb, twist it 'forwards' in
5.
its socket until it clicks [Fig. 3].
Slide the bulb up out of its sockets [Fig. 4].
6.
Replace with a new bulb.
7.
Twist the new bulb 'backwards' to lock it back in
8.
place.
UK
Fig. 1
Fig. 2
2