Table des Matières
Publicité
GB
FR
DE
ES
IT
SPECIAL SAFETY RULES
■
Use auxiliary handle supplied with the tool. Loss of
control can cause personal injury.
■
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a «live» wire may make exposed
metal parts of the power tool «live» and could give the
operator an electric shock.
INSTRUCTIONS FOR SAFE HANDLING
■
Make sure that the tool is only connected to the
voltage marked on the name plate.
Never use the tool if its cover or any bolts are missing.
■
If the cover or bolts have been removed, replace them
prior to use. Maintain all parts in good working order.
Always secure tools when working in elevated
■
positions.
■
Never touch the blade, drill bit, grinding wheel or other
moving parts during use.
■
Never start a tool when its rotating component is in
contact with the work piece.
■
Never lay a tool down before its moving parts have
come to a complete stop.
ACCESSORIES : The use of accessories or
■
attachments other than those recommended in this
manual might present a hazard.
REPLACEMENT PARTS : When servicing use only
■
identical replacement parts.
DESCRIPTION
1. Keyless Chuck
2. Torque Adjusting Ring
3. Handle
TM
4. AUTOSHIFT
indicators
5. Rotation Selector
(Forward/Reverse/Center Lock)
TM
6. Magnetic Tray
7. Double-Ended Bits
8. Switch Trigger
9. Battery Pack (not included)
10. Latches
11. Depress Latched To Release Battery Pack
12. Reverse
13. Forward
14. Drill Bit
15. Chuck Jaws
16. Lock (Tighten)
17. Unlock (Release)
18. To Decrease Torque
19. To Increase Torque
NL
PT
DK
SE
FI
NO
English
RU
PL
CZ
HU
RO
LV
SPECIFICATIONS
Voltage
Chuck (mm)
Switch
No load speed (drill mode):
- Lo speed
- Hi speed
Clutch
Max. Torque (Nm)
Max. Spade Bit (mm)
Weight - not incl.battery pack (KG)
MODEL
BATTERY PACK
(not included)
BPP-1815M
BPP-1817M
BPP-1815
BPP-1817
BPL-1820
CDA1802
BPL-1815
BPP-1815
BPP-1817
BPP-1815M
BPP-1817M
OPERATION
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses with
side shields when operating products. Failure to do
so could result in objects being thrown into your
eyes, resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
■
Drilling in all types of wood products (lumber, plywood,
panelling, composition board, and hard board)
Drilling in ceramics, plastics, fiberglass, and laminates
■
1
LT
EE
HR
SI
SK
GR
18 V
2-13
Variable speed
0 - 450 min-
1
0 - 1500 min-
1
24 Positions
55
38
1.89
CHARGER
(not included)
BCL-1800
BCL1418
BCS618
BCL14181H
BCL14183H
BC-1815S
BC-1800
BCL14181H
BCL14183H
TR
Publicité
Table des Matières
