Cleaning And Maintenance - Melitta Easy Therm Mode D'emploi

using the therm jug. With the help of the water level
display on the tank  you can choose the correct
number of cups. Small cup symbol = approx. 85ml
coffee per cup, large cup symbol = approx. 125 ml
coffee per cup.
• Close the lid on the water tank and place the therm
jug with closed lid in the appliance.
• Open the swivel filter  to the left.
filter bag 1x4
• Fold a Melitta
®
and place it in the filter holder.  Press the filter bag
into the filter holder by hand, to ensure a good fit.
• Put the ground coffee into the filter. The amount
depends on your personal taste. We recommend
using 6g of ground coffee per large cup.
• Swivel the filter back into the appliance.
• Turn the appliance on . Brewing begins.
• The appliance turns off automatically 15 minutes
after it has been turned on. This avoids unnecessary
use of electricity and saves energy. You can of course
turn the machine off manually at any time.
• The drip stop  prevents your coffee from dripping,
when you remove the jug from the appliance.
4. Using the insulated pot
• The brewed coffee flows through the central valve in
the insulated lid of the pot.
• To pour coffee press down on the sealing lever.
• Remove the lid simply by pressing the seals on the
side while lifting the lid up .

5. Cleaning and maintenance

External cleaning
• The appliance housing and the external parts of the
therm jug can be cleaned with a soft damp cloth.
• The swivel filter is detachable  and can be cleaned
in the dishwasher.
• The therm jug should be rinsed with hot water after
each use. Stubborn coffee stains can be removed
with "Perfect Clean Accessories" from Melitta
Do not use hard or abrasive objects, which could
damage the glass flask.
Descaling
Depending on water hardness the appliance can
become calcified with use. This also increases the
appliance's energy consumption as lime scale on the
heating element can prevent the water heating
effectively. To avoid damage the appliance must be
descaled regularly.
The descaling process consists of 2 steps, both of
which must be completed.
1. Descaling
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using "Melitta
Machines".
• Turn the appliance on and follow the descaler
manufacturer's instructions.
• When the descaler liquid has fully run through
the appliance then it should be turned off.
2. Rinsing
• After step 1 the appliance must be rinsed with fresh
water. To do this allow the machine to cool for a
short time (approx. two minutes) then fill the
at the embossed seam
®
.
®
Anti Calc Filter Café
®
appliance with the maximum amount of water.
• Turn the appliance on and allow all the water to flow
through it. Then turn the appliance off immediately.
• Repeat the rinsing process.
6. Notes on disposal
• Appliances labelled with this symbol
to European guidelines for WEEE (Waste Electrical
and Electronic Equipment.
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
are subject
GB
7