Honda EU10i Manuel De L'utilisateur page 34

2. Be sure to ground the generator when the connected equipment is
grounded.
3. Start each engine according to ''STARTING THE ENGINE''.
When the output indicator light (green) does not light and the
overload indicator light (red) lights instead, set the engine switch
to STOP, stop the engine once, and then start the engine again.
4. Confirm that the equipment to be used is switched off, and insert the
plug of the equipment to be used into the AC receptacle of unit
unit .
OUTPUT INDICATOR
LIGHT (GREEN)
Confirm that the use equipment to be connected is switched off.
When the equipment to be used is switched on, it will operate
suddenly, and injuries or accidents may be caused.
GROUND TERMINAL
OVERLOAD INDICATOR
LIGHT (RED)
GROUND TERMINAL
PLUG
or
31