Control Elements (Face Plate); Status Signaling - Knick VariTrans P 2900 P2 Série Mode D'emploi

Control Elements (Face Plate)

Switch S1
Switch S2
Switch S2
Potentiometer (output offset, max. ± 5 %)
Status LED (green)
Alarm LED (red), flashes momentarily at power-on
The warning sign means: read manual.
Switch S1

Status Signaling

Green LED: Supply voltage provided
Red LED: Error: Check load. If the error cannot be remedied,
send in the device for repair.
Note: The red LED fl ashes momentarily at power-on to
signal that load monitoring is functioning properly.
38
Function (factory setting bold print)
Input range
Output range
ON
Output, active
Voltage output
Output inverted
Cutoff frequency 10 Hz
Off set pot active
OFF
Output, passive
Current output
Output not inverted
Cutoff frequency 10 kHz
Calibrated range