Channel And Ssid - Belkin F1UP0001 Manuel De L'utilisateur

P74390ea_F1UP0001_man.qxd
Web Interface – Channel and SSID
r This menu allows the user to program the wireless settings.
• "Enable Wireless Networking" is on by default. Connecting the Print Server
via an Ethernet cable to the network will automatically disable wireless
d
networking.
• "SSID" is the wireless name of your network. The default setting is "ANY".
This allows the Print Server to connect to the first wireless network it sees.
Running the Wizard automatically changes "ANY" to the network SSID found
during the setup procedure.
• "Network Type" refers to either an Infrastructure or Ad-Hoc network. Any
network with a wireless router or access point is considered an
Infrastructure network (default).
• "Channel" is only applicable for Ad-Hoc installations. In infrastructure
networks, the wireless router or access point sets the channel
automatically.
• To see wireless networks in your area and choose the one you wish to
connect to, see "Web Interface – Site Survey" on the next page.
1/6/04 3:09 PM
WEB CONFIGURATION
15
Page 15