Fitting E 499 For Suction And Rinsing Cannulae; Irrigation Sleeves - Miele professional A 315 Mode D'emploi

en - Application technology
44

Fitting E 499 for suction and rinsing cannulae

The E 499 is for reprocessing rinsing and suction cannulae, including
suction breakers. It comes with its own instructions.

Irrigation sleeves

Irrigation sleeves are suitable for reprocessing hollow instruments and
instruments with the following external diameters:
– A 817, irrigation sleeve, length 65 mm, Ø 11 mm, cap with opening
Ø 6 mm
– E 336, irrigation sleeve, length 121 mm, Ø 11 mm
– E 442, irrigation sleeves for instruments Ø 4 - 8 mm, 121 mm long,
Ø 11 mm, cap with aperture Ø 6 mm
– E 443, irrigation sleeves for instruments Ø 8 - 8.5 mm, 121 mm
long, Ø 11 mm, cap with aperture Ø 10 mm
The aperture can be varied using optional replacement caps:
– A 818, 12 caps for irrigation sleeves, opening Ø 2 mm
– E 445, 12 caps for irrigation sleeves, aperture Ø 6 mm
– E 446, 12 caps for irrigation sleeves, aperture Ø 10 mm
The diameter of the instruments and the irrigation sleeve apertures
or caps must be compatible with each other, e.g. caps for irrigation
sleeves with an aperture diameter of Ø 6 mm for dental surgical suc-
tion cannulae.