Elkron HPA800 Notice D'installation page 35

CONTROL PANEL
CONTROL PANEL
35/52
EXAMPLE 3
SIREN inputs balanced (B4 OFF),
referred to positive (default)
CONTROL PANEL relay1 programmed
for Intrusion or Intrusion/Manipulation.
Output U2 programmed OR or AND TC.
R balancing ALL and TC inputs
10Kohm (not supplied)
R balancing SAB in accordance with the
value of the balancing
expected for the SAB input of the control
panel (15Kohm for ELKRON MP500
control panels)
EXAMPLE 4
SIREN inputs not balanced (default),
referred to negative (A1 OFF)
CONTROL PANEL relay programmed
for Intrusion
Output TC referred to -V
R balancing SAB in accordance with the
value of the balancing
expected for the SAB input of the control
panel (2,7Kohm for URMET 1067 control
panels)
resistance
resistance
HPA800