Installing Your Appliance - sauter SHD987 Guide D'installation Et D'utilisation

EN

2 / INSTALLING YOUR APPLIANCE

- The appliance must be unplugged during installation or when any repairs or maintenance work is being
performed.
- Ensure that the network voltage corresponds to the voltage noted on the identification plate located
inside the hood.
- If the electrical installation at your residence requires any changes in order to hook up your Appliance,
call upon a professional electrician.
- If the hood is being used in evacuation mode, do not connect the appliance to a combustion gas exhaust
duct (boiler, chimney, etc.) or to a CMV (controlled mechanical ventilation) system.
- Under no circumstances should the exhaust duct empty into the attic.
- Install the hood at safe distance of at least 65 cm from an cooking hob.
This appliance can be installed in either duction version or filtering version.
The appliance is supplied in the ducting version.
• USING THE DUCTING MODE
If you posses an outlet to the exterior
(fig. 1)
Your hood can be connected to this outlet using a
flue (minimum Ø 125mm that is enamelled, in
aluminium, flexible or made of inflammable material).
Your cooker hood is a ducting version.
• USING THE FILTERING MODE
fig. 1
If you do not posses an oulet to the exterior
(fig. 2)
All of our appliances can be used in recycling
mode.
The air and steam taken up by the unit are purified
with charcoal filter and returned to the environment
through the aeration grids on the side of the
telescopic flue.
fig. 2
21