Operating The Camera With The Rm-C950 Remote Control Unit - Sony ExwaveHAD DXC-390 Mode D'emploi

Operating the Camera with the RM-C950
Remote Control Unit
When the RM-C950 remote control unit is used with this
camera, the names and functions of the PRINT, FLASH,
LONG EXPOSURE and FUNCTION buttons and the GAIN
control change as follows, in accordance with the functions
of the camera.
Functions of the PRINT, FLASH, LONG EXPOSURE
and FUNCTION buttons and GAIN control on the
RM-C950
Buttons/control Button/control names
on the RM-C950 when used with the
camera
ENTER
PRINT
FILE SELECT
FLASH
LONG SHUTTER SPEED
EXPOSURE
 
Buttons/control
on the RM-C950
GAIN 
FUNCTION 
Attaching the supplied name sheet
The sheet for the button names when the camera is used
with the remote control unit is supplied with the camera.
Attach the name sheet to the control panel of the RM-C950.
1
Function
2
Use when displaying the
setting menu selected in
the MAIN menu, or use
to set the AE window,
etc. manually in the
menus.
Use to switch a preset
file between A and B.
Use to set the shutter
speed without
displaying the menu
when SHUTTER is set to
STEP or VARIABLE in the
menu.
Button/control names
when used with the
camera
GAIN
BLACK
Before attaching, clean the control panel of the RM-
C950.
Peel off the adhesive sheet at the back of the name sheet
and attach the name sheet to the panel.
Chapter 3 Installation and Connections
Function
Use to change the
variable range of gain
levels to 0–24 dB.
Use to start the auto
black balance
adjustment.
47
(GB)