Publicité
Les langues disponibles
Les langues disponibles
approx. 2 W.
•
Open the cover 3 by opening it up towards the front.
•
Set the ON / OFF switch 6 to position I.
•
Set the ON / OFF switch 6 to position 0 if you would like to turn off
the flame simulator.
•
Close the cover 3.
Using the dimmer function
Note: Your electric fireplace insert has a dimmer function. With it you
can adjust the brightness of the flame simulator.
Note: You can only use the dimmer function when the flame simulator
is switched on (see 'Switching flame simulator on / off').
•
Open the cover 3 by opening it up towards the front.
•
Set the ON / OFF switch 6 to position I.
•
Turn the dimmer 9 clockwise to increase, or anti clockwise to
reduce, the brightness of theflame simulator.
•
Set the ON / OFF switch 6 to position 0 if you would like to turn off
the flame simulator.
•
Close the cover 3.
Switching heating function on / off
Note: The electric fireplace insert has one heating stage.
•
Open the cover 3 by opening it up towards the front.
•
Set the ON / OFF switch 6 to position I.
•
Set the switch 7 for heating in to position I.
•
Make sure to leave cover 3 open in order to avoid becoming hot.
CAUTION: Some parts of this product can become
very hot and cause burns. Particular attention has to
be given where children and vulnerable people are
present.
12
Publicité
