General Remarks - Fronius Acctiva Easy MC 04 Mode D'emploi

General remarks

Introduction Dear reader, Thank you for the trust you have placed in our company and congratulati-
ons on buying this high-quality product. These instructions will help you familiarise
yourself with the product. Reading the instructions carefully will enable you to learn about
the many different features it has to offer. This will allow you to make full use of its
advantages.
Please also note the safety rules to ensure greater safety when using the product.
Utilisation in
accordance with
„intended purpo-
se"
The charger is intended exclusively for charging the following types of battery:
Batteries with liquid (Pb, GEL, Ca, Ca silver) or fixed (AGM, MF, sealant) electrolyte,
used in starter or traction applications.
Important! Do not charge dry batteries (primary cell) with this charger.
Installation
WARNING! Risk of electric shock from accumulation of output voltages
when connecting individual charging circuits in series. Individual charging
circuits must never be connected in series.
WARNING! Risk of explosion from build-up of gases at ground level during
charging. Ensure that
- the charger is mounted at least 50 cm (approx. 18 in.) above the floor
- the area has a plentiful supply of fresh air
NOTE! If fixing to the wall, please be aware of the weight of the charger.
The bracket must be fitted to a suitable wall using the correct dowels and
screws.
1