Accessories; Bar And Chain Combinations - Stiga C 38 Manuel D'utilisation

18
EN

10. ACCESSORIES

The table contains a list of all possible combina-
tions between bar and chain, indicating those
which may be used on each machine, marked with
the symbol " ".
WARNING!
selection, application and usage of bar and

Bar and chain combinations

Pitch
Length
Inches Inches / cm
3/8" 14" / 35 cm 0.050" / 1.3 mm
3/8" 16" / 40 cm 0.050" / 1.3 mm
325" 16" / 40 cm 0.050" / 1.3 mm
325" 16" / 40 cm 0.058" / 1.5 mm
325" 18" / 45 cm 0.058" / 1.5 mm
325" 20" / 50 cm 0.058" / 1.5 mm
WARNING!
binations it may cause serious personal injury and damage to the machine.
In consideration that the
BAR
Groove
width
Code
Inches / mm
OREGON
140SDEA041
OREGON
160SDEA041
OREGON
160MLBK041
OREGON
168PXBK095
OREGON
188PXBK095
OREGON
208PXBK095
For replacement use only above bars and chains. If you use non-approved com-
chain are actions made solely by the user, the
latter assumes responsibility for damages of
any kind due to such actions. When in doubt
or if lacking knowledge of the specificity of
each bar or chain, contact your retailer or spe-
cialised gardening centre.
CHAIN
C 38
Code
C 38 T
OREGON
91VG053X
OREGON
91PX053X
OREGON
91VG057X
OREGON
91PX057X
OREGON
95VPX066X
OREGON
21BPX066X
OREGON
21BPX072X
OREGON
21BPX078X
ACCESSORIES
Model
C 41
C 46
C 41 T
C 50