Symbols - Stiga C 38 Manuel D'utilisation

IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
IDENTIFICATION PLATE
10.1) CE Conformity marking
10.2) Name and address
of the manufacturer
10.3) Sound power level
10.5) Type of machine
10.6) Serial number
10.7) Year of manufacture
10.8) Article Code
10.9) Emission number
The example of the declaration of conformity can
be found on the penultimate page of the manual.

2. SYMBOLS

1
4
1) Warning! Danger. The failure to use this ma-
chine correctly can be hazardous for oneself and
others.
2) Beware of kickback! Kickback is the rapid and
uncontrollable backward motion of the chain-saw
in the direction of the operator. Al ways work in
complete safety. Use chains with sa fety links that
limit kickback.
3) Never hold the machine with one hand! Hold
the machine fast with both hands to control the
machine and reduce the risk of kickback.
4) Read the instruction manual before using the
10.9
Type:
Art.N.
- s/n
10.7
2 3
5 6
machine.
5) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
6) Wear gloves and protective footwear!
10.5 10.2 10.1
10.6 10.8
3
EN
10.3
L
WA
dB