STOP
STOP
To reduce the danger of breaking, please consider the following advices:
48h
nicht inklusive
not inclusive
non inclus
max 55°C
CAUTION, Warning:
This product is made of glass.
Before mounting, let this washbasin acclimatize
for 48h until room temperature is reached.
Mount the washbasin with sanitary silicone, according to the
assembly steps 2 and 3 in the manual. This guarantees your safety
in case of glass breakage, compensates irregularities and prevents
damage caused by water.
Please consider that there is no dirt at the edge of the hole,
when installing the drain-hole-cup.
Make sure that the fastening material is suitable for use at the wash basin.
Only use corresponding sealing material (rubber or plastic shims) for
fittings and drain and pay attention to the correct seat of these seals.
Local stress peaks resulting from contact with hard materials such as
metal or glass can quickly break the wash basin. Do not use force!
Observe the maximum water temperature of 55°C
and avoid extreme temperature changes.
Observe the instructions in the installation guide.
Do not use the basin as sports equipment, seat or substitute for a ladder.