Information On The Adhesive Strips - Gigaset elements S30851-H2517-R101 Notice D'utilisation Et De Montage

SMOKE ALARM

INFORMATION ON THE ADHESIVE STRIPS

 Only stick the sensors onto clean, dry, grease-free surfaces which are as smooth and
sturdy as possible.
 The optimal adhesive strength is attained after about 48 hours.
 The adhesive strips are intended for one-time use only.
 Only use the adhesive strips provided.
Gigaset Communications GmbH assumes no liability for potential damage to surfaces
caused by sticking on, setting up, installing and removing Gigaset elements sensors
and actuators.
ANTI-TAMPER SEAL OR SAFETY SCREW
A plastic anti-tamper seal can be ai xed to the smoke alarm to prevent unauthorised
removal.
Instead of this seal, a safety screw can be i tted to prevent unauthorised removal of the
smoke alarm.
The seal and screw are not included in the delivery and can be ordered separately.
Please contact the Gigaset customer service www.gigaset.com/service.
44
elements smoke