Selecting The Anchors; Assembly; Safety Inspection - ATT Nussbaum SPRINTER MOBIL 2500 Manuel D'exploitation

8.4

Selecting the anchors

• Liebig anchor without floor cover (screed)
Safety anchor with threaded bolts and nuts
BM 10-15/70/40
• Liebig anchor with floor cover (screed)
Safety anchor with threaded bolts and nuts
BM 10-15/70/xx (length of the anchor depends on
the floor covering)
• Fischer anchor without floor cover (screed)
High quality anchor FH II-B (bolts and nuts)
FH II 15/50 B
• Hilti anchor without floor cover (screed)
Heavy duty anchor
HSL-3-G M10/40
• Hilti anchor without floor cover (screed)
Heavy duty anchor
Hilti HIT-V-5.8/M10/130
i Similar value anchors and other known brands
of anchor manufacturers can be used when
considering the conditions.
8.5

Assembly

i Follow the instructions enclosed in the anchor
packaging.
OPI_SPRINTER MOBIL 2500-3000_V3.1_DE-EN-FR-ES-IT
9

Safety inspection

The safety inspection is required to guarantee oper-
ational safety of the lift. It is to be done.
1. Before first commissioning after setting up the lift
Use the "single safety inspection" form
2. After first commissioning, check regularly at least
once per year.
Use the "regular safety inspection" form
3. After changes to the lift construction.
Use the "extraordinary safety inspection" form
i Single and regular safety inspections must be
done by a specialist. It is recommended to do
maintenance at the same time.
After a change in construction (for example
i
changing the load carrying capacity or chang-
ing the lifting height) and after significant mainte-
nance on load carrying parts (e.g. welding work),
inspection by a technical expert is required (ex-
traordinary safety inspection).
This inspection book contains forms with a printed
inspection plan for safety inspections. Please use
the appropriate form, record the condition of the
inspected lift and leave the completed form in this
inspection book.
011
67