ATT Nussbaum SPRINTER MOBIL 2500 Manuel D'exploitation page 49

ENGLISH
Introduction
Nußbaum products are a result of many years of ex-
perience. A high quality standard and superior con-
cept guarantees you reliability, long lifetimes and
economical operation. To prevent unnecessary
damage and hazards, read this operating manual
carefully and always comply with its contents.
Any other use, or use beyond purpose is consid-
!
ered improper.
Nussbaum is not liable for any resulting dam-
!
age. The operating company alone carries the
risk.
Proper use also includes:
• Adherence to all instructions in this operating
manual.
• Compliance with inspection and maintenance
work and the inspections stipulated.
• The operating manual is to be followed by all per-
sonnel working on the system. This is notably with
regards to Section 3 „Safety conditions".
• In addition to safety information from the operat-
ing manual, comply with rules and regulations at
the location of use.
• Proper system handling.
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the system who
• Understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the system.
• Have read the safety section and warning infor-
mation in this operating manual, have under-
stood it and confirmed learning with a signature.
Hazards in working with the system:
Nußbaum products have been designed and built
to state-of-the-art and to recognized safety stan-
dards. However, improper use may lead to hazards
to life and limb of the user or result in property dam-
age.
The system may only be operated
• For proper intended use
• If it is technically in perfect condition
Organizational measures
• The operating manual is always to be kept ready
at the location of use of the system.
• Supplemental to the operating manual, refer to
OPI_SPRINTER MOBIL 2500-3000_V3.1_DE-EN-FR-ES-IT
Original Operating Manual
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
• Check occasionally that personnel have an
awareness of hazards and safe work in compli-
ance with the operating manual!
• Use personal protective equipment as needed or
required by regulations.
• All safety and hazard information on the system is
to be kept in a legible condition!
• Replacement parts must meet technical specifi-
cations of the manufacturer. This is only guaran-
teed for original parts.
• Deadlines pre-set or given in the operating man-
ual for repeating tests / inspections must be fol-
lowed.
Maintenance work, error removal
Comply with pre-determined
tenance and inspection
in the operating manual, including details for
exchanging parts / part fittings! These activities may
only be done by specialists who have participated
in a special factory training.
Guarantee and liability
• In principle, our „General sales and supply condi-
tions" apply.
Guarantee and liability claims for personal and
property damage are excluded if due to one or
more of the following causes:
• Improper use of the system.
• Improper assembly, commissioning, operation
and maintenance of the system.
• Operating the system with defective safety de-
vices or improperly attached or non-functional
safety and protection devices.
• Non-compliance with information in the operat-
ing manual in terms of transport, storage, assem-
bly, commissioning, operation, maintenance and
fitting of the system.
• Independent construction changes to the system.
• Independent changes to the system (e.g. drive
ratios: power, rotation speed, etc.)
• Independent changes to the system (e.g. drive
ratios: power, rotation speed, etc.).
• Improperly done repairs.
• Catastrophic cases due to foreign influences or
force majeure.
setting, main-
work and intervals
49