Cleaning And Maintenance - Woods LD48PRO+ Mode D'emploi

CLEANING AND MAINTENANCE

Wood's dehumidifiers require cleaning
and filter replacement to maintain its high
dehumidification capacity.
• The air outlet can be vacuumed or cleaned
with a brush. Use caution to prevent the slats
from being damaged.
• The cooling coils are best cleaned with a cloth
and warm water. Use caution.
• The fan motor is permanently lubricated and
requires no maintenance.
NOTE!
Unplug the power cord from the electrical
outlet before cleaning.
HINTS
• For maximum dehumidification capacity in
a room it is recommended that the supply
air from the outside and adjoining rooms are
minimized - close doors and valves. If possible,
place the dehumidifier in the middle of the
room.
• Raise the temperature in the room for faster
dehumidification. (Hot air can carry more
water). Use a frost guard if the temperature
drops below + 2 ° C
• The dehumidifier extracts more water during
the summer and autumn because the outdoor
air is warm and moist. (The absolute humidity
is normally higher).
• Recommended limits for use:
• Temp. SW + 2˚C to + 35˚C
• Relative humidity: 30% to 90%
• Recommended moisture level c.a. 50% RH
IF THE DEHUMIDIFIER REQUIRES
SERVICE
If the dehumidifier requires servicing, firstly
contact the retailer. For all warranty claims, a
proof of purchase is required.
NOTE!
Get a 10-year warranty! Register at
warranty-woods.com
Replace the SMF filter at least once a year.
Visit woods.se for more information
GUARANTEES
2 year´s guarantee against faults in
manufacturing. Please note that the guarantee
only is valid upon presentation of a purchase
receipt
IMPORTANT!
Wood's dehumidifier shall be connected to a
grounded electrical outlet having a voltage of
220V-240V 50Hz. "
OPERATION INSTRUCTIONS
EN
09