OPERATION
• Attach the bottom of Seat Pad to the
21)
Seat Base with the two Elastic loops
located at the rear of the bottom of the
Seat Pad. These fit over the Attachment
Tabs located on the Seat Base near
where the Seat Back and Seat Base
Join (Fig. 21).
TO REMOVE SEAT PAD
Reverse steps above.
OPTIONAL SEAT INSERT
• Set Seat Insert onto Seat Pad.
22)
See step 19.
13
Copyright © 2018, Baby Trend ® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
CARE AND MAINTENANCE
Dishwasher Safe Tray Insert: The Tray Insert is dishwasher safe to 160º F (71º C).
Do not use scouring pads on the Tray Insert as they will damage the surface and
the Tray Insert will become more difficult to clean.
High Chair/Tray: Use mild soap and wash with damp cloth. Please use only a soft
bristle brush, sponge or cloth to clean the surface or remove particles of food.
NOT
Fig. 21
Seat Pad and fabrics (please refer to the care label on indiviadual soft good
pieces for cleaning instructions).
To remove the seat pad:
Remove Harness Straps by pushing Harness Attachment Tabs through the
Harness slots on the Seat Back, Seat Base and Seat Pad. Remove Elastic Loops
from Attachment Tabs on Seat Base and Seat Back.
To attach the seat pad:
Carefully follow the instructions outlined in Step 19 on how to correctly re-thread
the safety harness.
Fig. 22
WARNING:
Harness Straps and Basket are
NOT washable.
submerge High Chair and Tray in water. Surface clean only.
Copyright © 2018, Baby Trend ® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
MAINTENANCE
DO
14