Vetus SENSORD Manuel D'utilisation Et Instructions D'installation page 43

Example 2
If the drinking water tank is a V-shaped
tank, for example, the volume and the
height of the tank must be entered. These
are both still set to 0.
Tank calibration
Tank type
Tank volume
Tank depth
20% tot. depth
40% tot. depth
60% tot. depth
80% tot. depth
Exit
• Press followed by
The screen allowing the volume to be
entered will now be displayed.
Tank calibration
Tank type
Tank volume
Tank volume
0 1 2 3 4
5 6 7 8 9
Tank depth
.
20% tot. depth
40% tot. depth
123
60% tot. depth
80% tot. depth
Exit
Ultrasonic tank management system
V-shape
0.0 l
0.0 cm
n.a.
n.a.
n.a.
n.a.
.
V-shape
0.0 l
0.0 cm
n.a.
n.a.
n.a.
n.a.
• Delete value 0.0 using the backspace
function () and enter the volume of
the tank. For example, '123' (litre).
This value must now be saved in the
memory.
Tank calibration
Tank type
Tank volume
Tank volume
0 1 2 3 4
5 6 7 8 9
Tank depth
.
20% tot. depth
40% tot. depth
123
60% tot. depth
80% tot. depth
Exit
• Select Enter ( ) and press the

key 1x.
Tank calibration
Tank type
Tank volume
Tank depth
20% tot. depth
40% tot. depth
60% tot. depth
80% tot. depth
Exit
• Then press
be able to set the tank height.
Tank calibration
Tank type
Tank depth
Tank volume
0 1 2 3 4 5 6 7 8 9
Tank depth
.
20% tot. depth
40% tot. depth
60% tot. depth
80% tot. depth
Exit
ENGLISH
V-shape
0.0 l
0.0 cm
n.a.
n.a.
n.a.
n.a.
V-shape
123.0 l
0.0 cm
n.a.
n.a.
n.a.
n.a.
followed by to
V-shape
0.0 l
0.0 cm
n.a.
n.a.
n.a.
n.a.
43
090430.01