The Tank Data - Vetus SENSORD Manuel D'utilisation Et Instructions D'installation

3.3

The tank data

Data must be entered for each tank.
First of all each sensor must be given a
unique name so that it can be recognised.
Choose a name which is in agreement
with the function of the tank in which the
sensor is placed.
On delivery each sensor has the name
'Vetus' and Vetus 40 l tank is entered for
the type of tank.
The corresponding volume and height are
already entered for the plastic tanks from
the Vetus range; these cannot be altered.
Select a tank from the table below if a Ve-
tus tank is used.
Type of tank
Vetus 40 l
Vetus 42 l
Vetus 60 l
Vetus 61 l
Vetus1 88 l
Vetus2 88 l
Vetus 110 l
Vetus 120 l
Vetus 137 l
Vetus 170 l
Vetus 216 l
Vetus 335 l
Vetus 390 l
The shape, volume and height must be
entered for other tanks.
The volume for different heights must also
be entered depending on the shape, see
the table below.
38
090430.01
Tank height:
37 cm
29 cm
37 cm
29 cm
33 cm
37 cm
29 cm
29 cm
33 cm
40 cm
60 cm
35 cm
80 cm
Type of tank
V-shape
Irregular shape
Regular shape
Cylindrical
The names for the tanks and the corre-
sponding data are saved in the sensors,
also after switching off the power and
pulling out the plug connector.
Ultrasonic tank management system
Data to be entered
- Volume in litres
- Height in cm
- Volume in litres
- Height in cm
- Volume: at 20, 40,
60 and 80% of the
height of the tank
respectively
- Volume in litres
- Height in cm