Cleaning And Maintenance - Medisana 51066 Mode D'emploi

51066/51067_HGN_Mini-Format_West.qxd:Bltudruckmessgerät
GB
6 Miscellaneous
6.2 • Remove the batteries before cleaning the unit.
Cleaning and • Never use strong detergents or hard brushes.
maintenance • Clean the unit using a soft cloth lightly moistened with a mild soapy solution. Never use abrasive
• Do not allow any water to get into the unit. Do not use the unit again until it is completely dry.
• Remove the batteries from the unit if you do not wish to use it for an extended peri
• Do not expose the unit to direct sunlight, and protect it from dust and moisture.
• Only inflate the cuff when it is in position around the wrist.
• The unit is best kept in the storage box included in your purchase and should preferably be
• Servicing and calibration (applies to commercial use):
This product must not be disposed of together with domestic waste.
6.3
All users are obliged to hand in all electrical or electronic devices, regardless of whether or not they
Disposal
contain toxic substances, at a municipal or commercial collection point so that they can be disposed of
in an environmentally acceptable manner.
Please remove the battery before disposing of the device/unit. Do not dispose of old batteries with your
household waste, but at a battery collection station at a recycling site or in a shop.
Consult your local authority or your supplier for information about disposal.
32
cleaning agents or alcohol.
otherwise there is a risk of battery leakage.
stored in a clean dry place.
The unit has been calibrated by the manufacturer for a period of two years' use. In the case of
commercial use, the unit must be serviced and recalibrated at least once every two years.
This calibration will be charged for andcan be carried out by an appropriate authority or an
authorised service centre - in accordance with the regulations for users of medical equipment.
01.02.2012 16:28 Uhr Seite 32
od of
time,