Attaching/Removing The Auxiliary Handle; Adjusting The Guard For Grinding - Parkside PWSAP 20-Li C3 Instructions D'utilisation Et Consignes De Sécurité

The charging control LEDs (green
red ) indicate the status of the charger
[ ]
and the battery pack
LED
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack) Charger ready
Insert the battery pack
charger .
[ ]
Connect the power cord with power plug
of the charger to the socket.
[ ]
When the battery pack
charged: Remove the battery pack from the
charger . Then disconnect the power cord
[ ]
with power plug
[
socket.
˜ Attaching/removing the
auxiliary handle
(Fig. E)
NOTE
The product may only be operated with the
u
auxiliary handle
6 ] [
Screw the auxiliary handle
the type of work, to the left (a), right (b) or on
the top (c) of the product using the auxiliary
handle threads
2 ] [
and
[ ]
:
5 ] [
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
into the
[ 5 ]
is fully
[ 5 ]
of the charger from the
]
fitted.
, depending on
6 ] [
.
˜ Adjusting the guard for
grinding
[ ]
(Fig. F)
m
WARNING!
Before adjusting the guard for
grinding
Remove the battery pack
the product to prevent the product
from starting unintentionally. Let the
product cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Wear protective gloves. Be careful
when handling the guard for
grinding
[ ]
hazard between the guard and the
disc.
NOTE
The product must only be operated with the
u
guard mounted.
Adjust the guard for grinding
any sparks or detached parts cannot hit either
the user or any bystanders.
The guard for grinding
positioned such that the sparks cannot ignite
combustible parts, including those in the
surroundings.
Turn the guard for grinding
position. With every rotation of 30°, you can
feel and hear the guard for grinding snapping
into place. Only use the product when the
guard for grinding is locked.
: Switch the product off.
[ ]
from
5 ] [
as there is a pinching
[ ]
such that
[ ]
must also be
[ ]
to the required
[ ]
GB/IE 51