Technical Data; Disposal - AEG SR 4375 BT Mode D'emploi

English
40 40
Symptoms Course
Device cannot Device crashes
be operated. and "hangs".
CD playback Audio cable
not available. connected to the
AUX IN socket.
No audio The device is not
signal during registered with
bluetooth the audio source.
connection.
Volume too low.
Device can not Registration does
be connected. not work.
Audio source is
shut off.
Bluetooth is shut
off on the audio
source.
Bluetooth version
is not supported.

Technical Data

Model: ................................................SR 4375 BT / CD / USB / MP3
Power supply: ..............................................................230 V~, 50 Hz
Battery operation: ..................................6 x 1.5 V, Type UM 2 / R 14
Power consumption:.................................................................13 W
Protection class: ..............................................................................Ⅱ
Net weight: .............................................................. approx. 1.19 kg
Radio section:
Frequency ranges: ...................................FM 88 ~ 108.0 MHz
Bluetooth
Bluetooth support: .....................................................................V 3.0
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................2.402-2.480 GHz
Protocols: ...................................................................A2DP / AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
SR4375_IM

Disposal

Solution
Disconnect the power
Meaning of the "Wheelie Bin" Symbol
supply for 5 sec. Then
switch the device on
again.
Disconnect the cable
from the AUX IN
socket.
and health impacts through improper waste disposal.
Ensure that there is a
connection. Register You contribute to recycling and other forms of utilization of
the device with the old electric and electronic appliances.
audio source again, if
Your municipality provides you with information about col-
necessary.
lecting points.
Increase the volume
on the device.
Increase the volume
on the audio source.
Check to see if the
audio source supports
the A2DP protocol.
Turn on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Use a different play-
back device.
Take care of our environment, do not dispose of
electrical appliances via the household waste.
Dispose of obsolete or defective electrical
appliances via municipal collection points.
Please help to avoid potential environmental
22.04.16