Twintec Maintenance; Spare Parts; Recommended Spare Parts; Schematic Diagram - Numatic TTB 1840 Notice Originale

Daily
Keep the machine clean.
Ensure brushes/ pads/ squeegee/ filters are in good condition.
Check for any worn or damaged parts and replace immediately.
Drain and rinse dirty water tank after every use.
Weekly – as daily and –
Check brush or pad and skirt and rinse.
Check floor-tool blades for wear and wipe clean.
Clean separator assembly including filter and check condition of seal.
Flush out system with clean water and clean filters.
Do not steam clean or pressure wash.
Batteries
Always re-charge the batteries after use.
Part No. SPARES & ACCESSORIES
909996 BATTERY.36.8700
911334 LITHIUM BATTERY CHARGER
912365 CHARGER CABLE (UK)
912361 CHARGER CABLE (EURO)
912364 CHARGER CABLE(SWISS)
912363 CHARGER CABLE(SOUTH AFRICAN)
912360 CHARGER CABLE(AUSTRALIAN)
912362 CHARGER CABLE(NORTH AMERICAN)
208455 M5 KNOB(BLACK)
901880 PROTECTION PLUG
303961 TANK FILTER ASSEMBLY
Part No. SPARES & ACCESSORIES
903531 SERILOR REPLACEMENT BLADE SET
903532 SERILOR COMPLETE SQUEEGEE ASSEMBLY
303985 FILLER CAP ASSEMBLY
903544 FILLER CAP LID
237232 SEPARATOR FILTER
237411 GRIT BASKET
213054 SUCTION HOSE
213055 VAC HOSE
303997 DUMP HOSE ASSEMBLY
208471 CONSTANT TENSION CLIP(DUMP HOSE)
903325 32MM HOSE CAP(RED)
905628 1840 SERVICE BUNG SEALING KIT

Spare Parts

Schematic Diagram

T 01460 68600
35