Installation And Connection - Miele professional DOS-Modul G 10 Notice De Montage

Installation and connection

G 7804
a = electrical supply connection
neutralising agent
b = dispenser hose connection
neutralising agent
90 cm wide machines
a = electrical supply connection
rinsing agent / neutralising agent
b = dispenser hose connection
rinsing agent / neutralising agent
6
For wall mounting the DOS module two
screws (4.8 x 32) and two plugs (8 mm)
are included with the unit.
Dimensions:
^ Mount the module in a suitable loca-
tion on the wall.
^ Connect the dispenser pump and
electricity supply.
^ Adjust the position of the cover caps
along the siphon tube so that the
tube will reach the bottom of the con-
tainer.
^ Fill the storage container with the rel-
evant agent, feed the siphon tube
into the container and tighten the
cover cap securely.
DOS-Module venting and dispensing
instructions are given in the Operating
Instruction booklet for the machine.