Installation Requirements; Tools Needed; Location Requirements - Haier HLP0R02AXW Instructions D'utilisation

INSTALLATION REQUIREMENTS

TOOLS NEEDED

•
1/2" and 7/16" Wrench

LOCATION REQUIREMENTS

•
The stand must be installed on a solid floor. A concrete floor is best.
•
The floor should be level.
•
A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
•
Do not install on carpeting.
•
The location must have appropriate electrical and gas supply outlets. See the
"Electrical & Gas Supply Requirements" section in your product's User Manual.
•
Do not install in a location where the dryer might come into contact with
combustible materials such as, but not limited to curtains, thick carpet, and/or
any materials that might obstruct ventilation.
STAND DIMENSIONS
(123.4 cm)
4
•
48³⁷⁄₆₄"
24¹¹⁄₁₆"
(62.7 cm)
Phillips screwdriver
75³
(192 cm)
19¹¹⁄₁₆"
(50 cm)
₄"