General Information; Safety; Appliance Description - Stiebel Eltron MEW Utilisation Et Installation

OPERATION

GENERAL INFORMATION

OPERATION _____________________________________________ 8
1. General information ____________________________________________8
1.1 Key to symbols ______________________________________________________ 8
2. Safety ____________________________________________________________8
3. Appliance description __________________________________________8
4. Operation ________________________________________________________9
5. Cleaning, care and maintenance ______________________________9
6. What to do if ... _________________________________________________9
6.1 ... there is no hot water ___________________________________________ 9
6.2 ... the water fl ow rate is weak ___________________________________ 9
6.3 ... water is dripping from the tap _______________________________ 9
INSTALLATION __________________________________________ 9
7.

Safety ____________________________________________________________9

7.1 Country-specifi c safety information ____________________________ 9
7.2 Instructions, standards and regulations _______________________ 9
8.

Appliance description __________________________________________9

8.1 Standard delivery ___________________________________________________ 9
9. Installation conditions _________________________________________9
10. Installation ______________________________________________________9
10.1 Tap _____________________________________________________________________ 9
10.2 Water connections _________________________________________________ 10
11. Commissioning ________________________________________________ 10
11.1 Filling the water heater __________________________________________ 10
11.2 Checking the fl ow rate ____________________________________________ 10
11.3 Switching on the water heater __________________________________ 10
12. Specifi cation ___________________________________________________ 11
12.1 MEW __________________________________________________________________ 11
12.2 MES___________________________________________________________________ 11
12.3 MESL _________________________________________________________________ 11
CUSTOMER SERVICE AND GUARANTEE _______________ 12
ENVIRONMENT AND RECLYCLING _____________________ 12
8 |MEW | MES | MESL
1. General information
Chapter Operation is intended for users and contractors.
Chapter Installation is intended for contractors.
Please read
Read these instructions carefully and retain them for
future reference. If the appliance is passed on to a third
party please hand these instructions to the new user.
1.1 Key to symbols
1.1.1 Symbols in these instructions:
In this documentation you will come across symbols and highlights.
These have the following meaning:
Please note:
!
Information concerning an existing risk. Damage can
occur to the appliance or the environment. Material
losses can also result.
Please read
Read the text next to these symbols carefully.
»
Passages preceded by these symbols indicate procedures you
must follow; these are described step-by-step.
- Passages with this symbol indicate lists.
2. Safety
Risk of scalding or burning!
This risk only exists at temperatures above 43 °C.
Limescale can block the tap outlet.
!
Never close off the tap outlet, and never use jet
!
controllers, aerators, fl ow limiters or hoses with jet
controllers.
In all of the instances mentioned above the water heater is under
mains pressure. As it is not designed for this, it could be damaged.
3. Appliance description
This tap is intended for operation with an open vented (zero
pressure) undersink water heater.
The tap is fi tted with a perlator.
With the MEW tap you can operate the waste set included in the
delivery using the pull rod on the back.
www.stiebel-eltron.com