Range Safety - Avanti GRO20P0W Manuel D'instructions

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
All safety messages will alert you what the potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the instructions are not followed.
IN THE COMMONWEALTH OF MASSACHUSETTS
•
This product must be installed by a licensed plumber or gas fitter.
•
When using ball-type gas shut-off valves, they shall be the T-handle type.
•
A flexible gas connector, when used, must not exceed 3 feet in length.
Installation of this range must conform with all local codes, or in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1 / NFPA.54, latest edition.
In Canada, installation code, CAN/CGA-B149.1 or the current Propane installation code, CAN/CGA-
B149.2, and with local codes where applicable.
DO NOT use an air curtain or other overhead range hood, which operates by blowing a downward
airflow onto a range, in conjunction with a gas range unless the hood and range have been designed
and tested and listed by an independent laboratory in accordance with the Standard for Domestic
Gas Ranges, ANSI Z21.1• CSA 1.1 for combination use. The installation instructions for both the
gas range and air curtain range hood shall include statements that the air curtain or overhead range
hood is permitted to be used in conjunction with a gas range, and that both unit have been designed
and tested in accordance with the Standard for Domestic Gas Ranges, ANSI Z21.1 • CSA 1.1 for
combination use. Purchaser / Installer should review the installation instructions for each unit to
ensure their range is acceptable for use with such ventilation system.
Installation in Manufacturered (Mobile) Homes:
The installation must conform with the Manufactured Home Construction and Safety standard, Title
24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title
24, HUD (Part 280)} or, when such standard is not applicable, the Standard for Manufactured Home
Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.

RANGE SAFETY

This is the Safety Alert Symbol.
This symbol alerts you to potential hazards that can kill or injure you and others.
All safety messages will follow the Safety Alert Symbol and either the words
"DANGER", "WARNING" or "CAUTION". These words mean:
Danger means that failure to heed this safety statement may result in
severe personal injury or death.
Warning means that failure to heed this safety statement may result
in extensive product damage, serious personal injury, or death.
Caution means that failure to heed this safety statement may result in
minor or moderate personal injury, or property or equipment damage.
BEFORE YOU BEGIN!
BEFORE INSTALLATION
3