Hendi 272404 Mode D'emploi page 10

STEP 10: Hold Glass Tube (G) and insert one side of Glass Tube into Flame Screen (B) until touching the top of Flame
Screen, then Insert another side of Glass Tube (G) into center of Tank Housing (top of Burner Assembly).
NOTE: GLASS TUBE IS A FRAGILE PART, ASSEMBLE GLASS TUBE CAREFULLY AND SLOWLY!
EN
STEP 11: Repeat Step 7 and step 9 to assemble the last
Mesh Guard – Lower (D) and Mesh Guard – Up-
per (C). Replace 4pcs Guard Fastening Plates on
the FLAME SCREEN (B) used 4pcs screws and
washers.
10
STEP 12: Insert & Fix the door to Tank Housing Assembly
(K), then attach the Chain (L) to Burner Assembly
(J).