Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
Extent of delivery
Scroll saw DKV 400-2
Saw blade protection
Blow-off device
Saw blade (3 pcs.)
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Symbols used in the operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling of the
saw. Not observing this instruction can lead to faults
in the saw.
User information. This information helps you to use
all the functions of the saw optimally.
Assembly, operation and servicing the saw. Here
you are explained exactly what to do.
16
Screw bag
Tools for assembly works
Operating manual
3 - 5
Carefully read
6 - 7
operator's
16
manual before
handling the
16
machine.
16
Observe in-
16
structions and
safety rules when
17
operating.
17
Risk of injury of
19
fingers and hands
19
by the saw blade
20
Electrical devices do not go into the domestic
20
rubbish. Give devices, accessories and packaging
20
to an ecofriendly recycling.
21
According to the European Directive 20012/19/EU on
21
electrical and electronic scrap, electrical devices that are no
21
longer serviceable must be separately collected and brought
to a facility for an environmentally compatible recycling.
21
22
Characteristic noise values
22
DIN EN ISO 3744; 11/95, DIN EN 11201
Application of the machine as scroll saw with standard saw
blade.
Sound power level
L
= 79.9 dB(A)
WA
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a
relationship between emission and immission levels, it can be reliably
deduced whether additional precautionary measures are necessary or
not. Factors, which can influence the immission level currently existing
at the workplace include the duration of the effects, the special type of
the workroom, other noise sources, etc. e.g. the number of machines
and other adjacent processes. The permissible workplace values can
also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried
out.
The saw is suitable for working with small and complex
forms of wood, plastics, plexiglass or hard plaster.
Round materials (logs, pipes, etc.) are not permitted to be
cut without a special device for this purpose.
Only workpieces which have been securely mounted and
aligned can be processed.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
The relevant accident prevention regulations for the
operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied
with.
Symbols machine
Shut off engine
and remove
power cord
before perfor-
ming cleaning,
maintenance or
repair work.
Wear eye
protection
Soundpressure level
L
= 66.9 dB(A)
PA
Normal intended use
Publicité
Chapitres
Table des Matières
