Installation And Connection - Bartscher Mini Mode D'emploi

5.2 Installation and connection

Setup
•
Unpack the device and remove all packing material.
•
Locate the device in a safe place that can support its weight.
•
Never put the device on a flammable surface.
•
Do not locate the device near an open flame, electric heater, oven or other heat
source, nor in direct sunlight. High temperatures can damage the device's surface
and have a negative impact on cooling capacity while increasing energy use.
•
Do not locate the device in places with high ambient humidity, as this may
damage the device.
•
Remember that the device must be well-ventilated for heat to be removed
properly, or the device will not function properly.
•
Never block the ventilation ducts. Maintain a distance of at least 10 cm from
walls and other objects.
•
For sanitary reasons, before activation ensure to thoroughly wash the device
on the inside and outside with a wet cloth, then dry.
Connection
•
Ensure the device is placed where its plug can be quickly removed from the socket if
such a need arises.
•
The device is adapted for connections to a 12 V jack (cigarette lighter), as well as an
alternating current network 230 V.
WARNING! Danger of electric shock!
Observe the following instructions when connecting the device, otherwise a risk
of electric shock will result.
CAUTION!
Prior to connecting the cable to a socket, turn the device off using the ON/OFF
switch.
- 26 -