Additional Safety Instructions - Asist AE3VK20DN Mode D'emploi

ADDITIONAL SAFETY INSTRUCTIONS

Additional safety instructions Warning! Sanding can
result in the formation of hazardous
dusts (e.g. arising from materials such as paints
containing lead, materials containing asbestos, metals
or some wood types), which can present a health ha-
zard to the operator or persons in the vicinity if touched
or inhaled. Make sure that the workplace is well venti-
lated. Always wear safety goggles, safety gloves and
respiratory protection. Attach a dust extraction system.
a) Secure the workpiece. A workpiece that is retained
with clamping appliances or a vice is held more se-
curely than with your hand.
b) Only use the power tool for dry sanding. Do not
scrape moist materials. Penetration of water into
the power tool increases the risk of electric shock.
c) Avoid overheating the sanded object and the sander
itself. Possible fi re hazard.
d) The workpiece gets hot during grinding. Do not
touch the machined area, allow it to cool down. There
is a risk of burning. Do not use coolants or the like.
e) Always empty the dust container before work bre-
aks.
Sanding dust in the dust sack, micro fi lter, paper sack
(or in the fi lter sack or extraction system fi lter) can self-
-ignite under unfavourable conditions such as fl ying
sparks caused by grinding metals. Particular hazards
are caused if the sanding dust is mixed with paint, po-
lyurethane residues or other chemical substances, or
if the sanded object is hot after long working periods.
Please check the operating manual of your vacuum
cleaner whether it is suitable for the suction of grinding
chips.
f) Connect the appliance to a power socket with a resi-
dual current circuit breaker of rated residual current no
more than 30 mA.
g) If the supply cord of this power tool is damaged, it
must be replaced by a specially prepared
cord available through the serviceorganization.
Residual risks
Even if properly operating and handling this electric
tool, some residual risks will remain.
Due to its construction and build, this electric tool may
present the following hazards:
a) Lung damage, if suitable respiratory protection is
not worn;
b) Cuts
c) Ear damage if working without ear protection.
d) Eye damage if suitable eye protection is not worn.
e) Damage to your health caused by swinging your
hands and arms when operating the appliance for lon-
ger periods of time or if the unit is not held or
maintained properly.
Warning! During operation, this electric tool genera-
tes an electromagnetic fi eld which, under certain cir-
cumstances, may impair the functionality of active or
passive medical implants. To reduce the risk of serious
or lethal injuries, we recommend that persons with
medical implants consult their doctor and the manu-
facturer of their medical implant before operating the
machine
If unused, store the equipment on a safe dry place
away from children.
- Use protective equipment against noise,
dust and vibrations !!!
KEEP THESE SAFETY INSTRUCTIONS FOR
FUTURE REFERENCE !!!
DESCRIPTION (A)
1 Oscillation frequency controller
2 Ventilation holes
3 On/off switch
4 Handle
5 Mains cable
6 Connection for dust extraction
7 Release button dust collection box
8 Dust collection box lid
9 Tab for opening the dust collection box
10 Dust collection box
11 Adapter for external dust extraction
12 Orbital sander disc
13 Terminal strip for clamping sandpaper
14 Clamping lever for clamping sandpaper
15 Sander motor unit
16 Case
17 Eccentric grinder disc
18 Triangular sanding plate
19 1 sanding sheets for orbital sander disc
20 1x sanding sheets for eccentric grinder disc
21 1x sanding sheets for sanding plate
22 4 Phillips screws for mounting the sanding disc
23 Movable mounting plate
24 Threaded bore
25 Marking
26 Felt ring
27 4 rubber pins
28 Mounting frame for fi lter insert
29 Filter insert for dust collection box
Accessories
1x dust extraction attachment
3 plates (rectangular on the machine, round, triangular)
3pcs sanding paper, roughness 120
(1pc for round plate, 1pc for rectangular plate, 1pc for
triangular plate)
PICTOGRAMS
Pictograms and values stated on the product
packaging:
a) Power values
b) Power consumption
c) No-load speed
(d) Abrasive surface
48