Product Overview; Installation Overview - STEINEL IS 3180-24 Consignes D'installation

2
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualified electrician is recommended

Installation Overview

In this package
IS 3180-24
• IS 3180-24 • IS 3360-24
occupancy sensor
• Accessory pack • Accessory pack
containing: plastic
nipple, plastic
washer, lock nut,
lens cover
• Installation • Installation
instructions
Needed for installation
• Recommended wire: 18
AWG, 3 conductor
• For use with a STEINEL
power pack
www.steinel.net
(800) 852-4343
WARNING
IS 3360-24 IS 345-24
• IS 345-24
occupancy sensor
occupancy sensor
• Accessory pack
containing: plastic
containing: plastic
nipple, plastic
nipple, plastic
washer, lock nut,
washer, lock nut,
lens cover
lens cover
• Installation
instructions
instructions
Intended uses
• Suitable for automatic
switching of lights
Environmental considerations
For indoor use only

Product Overview

24VDC PIR
IP20
Product description
The IS 3180-24, IS 3360-24
and IS 345-24 are part of the
STEINEL family of German-
engineered, high performance
commercial occupancy
sensors. They provide
exceptional lighting control in a
wide range of building spaces.
Applications
IS 3180-24
• Wall or ceiling mount • Ceiling mount
applications where applications where
180° coverage is 360° coverage is
needed needed
• Classrooms, offices, • Open and cubicle
conference rooms spaces
• Lobbies
The sensors turn lighting ON either
automatically with occupancy or
manually using a low voltage wall
switch and the manual on mode
of a STEINEL power pack. After a
period of time where no occupancy
has been detected, the sensors
switch lighting OFF.
IS 3360-24 IS 345-24
• Ceiling mount
coverage where
aisle way coverage
is needed
• Corridors
www.steinel.net
(800) 852-4343
3