13 Troubleshooting Guide - Fhiaba 1T Mode D'emploi

Masquer les pouces Voir aussi pour 1T:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

13
Troubleshooting guide
13.1
Troubleshooting guide
If you notice malfunctions in your appliance, use this guide before calling
Service. This guide may help you resolve the problem yourself or could
provide important information to ensure rapid and effective service.
Malfunction Message
A malfunction is usually indicated on the display.
Problems that cannot be resolved by the user are signalled through a
malfunction code.
The appliance does not work
Is the appliance connected to the electrical power supply?
Does electrical power arrive at the electrical socket?
Is the Unit key
activated?
Is the condenser clean?
The internal temperatures are
Does the display show a malfunction code?
higher than normal
Is the temperature adjusted correctly?
Is the condenser clean?
Were the doors or drawers open for a long period of time?
Were large quantities of food recently inserted?
The appliance remains in function for a long
Bear in mind that during a very hot weather and with very high tem-
time period
peratures in the room it is normal that the compressor remains in op-
eration for prolonged periods of time.
Were the doors or drawers open for a long period of time?
Were large quantities of food recently inserted?
Is the condenser clean?
Check that the doors are closed and that the food or containers do
not obstruct the perfect closure of the door.
If you hear strange noises
It is normal to hear noise from the fans or compressors during the
defrost phase.
Noise could be louder depending on the position of the appliance
and the surrounding environment.
Condensation forms both inside and out
If the climate is very humid, the formation of condensation is normal.
Opening the door or drawers for prolonged periods of time can con-
tribute to the formation of condensation.
In any case, make sure that the doors are always perfectly closed.
The Refrigerator or Freezer has frost or ice
Did you leave the doors open for a long period of time?
Do the doors close perfectly?
If the doors do not close perfectly, contact your installer.
Unpleasant odours inside the refrigerator
Clean the appliance completely as indicated in this manual.
Hermetically cover all the food. Do not conserve food for prolonged
periods of time.
The appliance was designed to permit hermetic closure.
When the door is closed, a vacuum situation can occur: in this case it
is necessary to wait a few seconds until the pressure balances before
opening the door.
26

Publicité

Chapitres

Table des Matières
loading

Table des Matières