DO NOT PULL THE CABLE BEYOND THE RED MARK.
Using the vacuum cleaner with the cable fully or partly wound involves
an overheating hazard!
NOTE:
Bear in mind that a new appliance can develop odours the first few times it is used.
These odours are harmless and disappear shortly afterwards. Ventilate the room.
Press the ON/OFF button
The electronic power control (8) allows you to adjust the suction force:
Minimum: for curtains, fine and delicate fabrics
Average: ideal for cleaning sofas, armchairs, upholstered chairs, rugs and carpets
Maximum: for smooth floors.
The suction power can also be changed by means of the manual adjusting device of the air
flow (2) found on the handle (1) [Fig. E1].
Closed: Increases the suction power
Open: Reduces the suction power
Open the adjustment device of the air flow to reduce the suction power if an object, which
has been drawn, blocks the opening.
Switch the appliance off after use, by pressing the ON/OFF button
the plug from the socket.
Press the automatic cord winding button (10) to wind the power cable [Fig. F1].
Hold the plug while winding the cable in order to prevent whiplash.
The flexible suction pipe (5) can be disconnected from the appliance before putting it away.
To do so, press the flexible pipe fastening buttons (6) and disconnect the flexible pipe.
The suction pipe (3) or the combined brush (4) can be stored by hooking it to the appliance;
the relative figures in the illustrative guide are marked with the parking symbol [Fig. F2, F3].
ATTENTION!
Switch the appliance off and disconnect the plug from the socket before
opening the appliance! Make sure all cleaned parts are completely dry
before reusing the appliance.
CLEANING THE APPLIANCE
When necessary, clean the appliance with a damp cloth.
ATTENTION!
DO NOT USE SOLVENTS OR OTHER AGGRESSIVE OR ABRASIVE
DETERGENTS. THIS CAN DAMAGE THE SURFACE.
(9) once to switch the vacuum cleaner on or off.
MAINTENANCE
EN
(9) and disconnect
13