Use; Filling With Bioethanol - empasa OAKLAND Mode D'emploi

Use

Use

Filling with bioethanol

WARNING!
Risk of burns and fire
Incorrect filling of the bioethanol may lead to burns or fire.
- Immediately wipe up spilt and overflowing bioethanol and rinse off with water so
that it does not catch fire on ignition.
The chamber may only be filled with bioethanol fuel min 96% by volume, denatured
with MEK and Bitrex. We recommend the following fuel: Ethanol 96.6%, denatured
Trade name: Bioethanol Premium 96.6%
Manufacturer: Höfer Chemie GmbH, Friedrichsthalerstr. 5, 66280 Sulzbach
A fuel analysis from the relevant, common literature has been used for the ethanol
fuel.
1. Ensure that the combustion chamber
visible.
2. Use a funnel to pour the bioethanol.
3. Fill the combustion chamber
mark.
4. Ensure that no bioethanol runs into the safety container
body 1 if necessary remove bioethanol from the safety container
chamber body 1
5. Please clean the combustion chamber
Please remove possible soot residues from the chamber body
Do not leave the bioethanol in the
periods, but ignite it immediately after filling.
Please note: Discoloration may occur around the combustion chamber
EP01181
5 with a max. 350 ml bioethanol up to the MAX
before igniting the bioethanol in the combustion chamber
5 is clean and the MAX mark is clearly
5 with a damp cloth after each use.
combustion chamber
44
2 or onto the chamber
2 and
1 .
5 for long
5 .
5 .
V1/2017