Cleaning And Maintenance - Domo DO152A Mode D'emploi

DO152A
appliance will automatically start at the medium speed and will maintain this speed for
3 minutes. Then the appliance will switch to the speed that has been set during those
3 minutes. If no speed has been set, the appliance will automatically switch to high
speed. This to prolong the life of the product.
SWING
By pressing the Swing button, the air vent will start turning. This helps to spread the
air flow over a larger surface.
TIMER
The timer can be set from 0.5 to 7.5h.
MODE
Press the Mode button to change the mode between: normal, natural or sleep.
Normal mode: the fan will work at the selected speed (1, 2 or 3).
Natural mode: the fan will alternate speeds randomly to obtain a natural air flow. The
fan will switch between the different speeds to immitate a natural and comfortable sea
breeze. In this mode you can also choose a high, medium or low speed cycle, which
then results in a strong, moderate or light sea breeze.
Sleep mode: the sleep mode also works with the immitation of a sea breeze (like
in natural mode), but the strenght of that breeze will reduce every half hour. At the
setting HI, the air cooler will consecutively produce a strong, moderate and light sea
breeze over a time period of 1.5 hours, after which this cycle is repeated. At the setting
ME, this is a moderate sea breeze followed by a light breeze. At the setting LO this is
only a light breeze. The sleep mode is best combined with the timer function, so that
the appliance switches off automatically when the set time has passed.
WATER LEVEL ALARM
When the water tank is running out of water during the function cooler/humidifier,
there will be an alarm signal during 10 seconds. After these 10 seconds the water
pump will automatically switch off. This to protect the water pump. The appliance will
continue to work as a fan.

CLEANING AND MAINTENANCE

• Remove the plug from the socket before cleaning the appliance.
• Remove the honeycomb filter. Clean the filter every 1 or 2 months if the
environment is susceptible to dust and dirt. Wash the filter in slightly soapy water,
with a soft cloth. Rinse well, so that all soap residues are removed. Let the filter
36