Operation - SilverCrest SSMS 600 C3 Mode D'emploi

Operation

GB
64
WARNING! RISK OF INJURY!
► Foodstuffs should not be too hot. Squirting contents may cause scalding.
NOTICE
► When you beat cream with the whisk
during the beating. In this way the cream will be thicker quicker. Ensure
that cream cannot be sprayed out of the container while it is being beaten.
When whipping cream, slide the speed regulator
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch
Slide the speed regulator
Slide the speed regulator
3) Press and hold the turbo-switch
By pressing the turbo-switch
immediately.
4) When you have completed the processing of the foodstuffs, simply release
the switch.
NOTICE
► Should unusual noises be heard during operation, such as squeaks or
similar, lubricate the drive shaft of the blender with a few drops of neutral
cooking oil:
hold the container at a slant
to process foodstuffs at the standard speed.
in the direction of "5" to increase the speed.
in the direction of "1" to reduce the speed.
to process foodstuffs at a higher speed.
the maximum processing speed is available
to position "5".
SSMS 600 C3